vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com page 1 of 5 VX-501 voltage controlled crystal oscillator at-cut crystal ? surface mount fr4 based package ? re ow process compatible ? low phase noise ? tight stabilities ? frequency range 1 - 800mhz ? standard frequencies 2.048; 10; 16,384; 30,72; 32,768; 38,88; 44.8; ? 52; 61.44; 68.736; 76.8; 77.76; 81.92; 92.16; ? 100; 112; 122.88; 125; 134.4; 153.6; 155.52; ? 160; 179.2; 184.32; 245.76; 312.5; 320; ? 368.64; 400; 448; 471.8592; 491.52; 622.08; ? 672; 737.28; 800mhz ? previous model number: c5310 ? base stations ? test equipment ? synthesizers ? switching ? features applications performance speci cations frequency stabilities 1 parameter min typical max units condition vs. operating temperature range (referenced to +25c) -15 +15 ppm -20 to +70c initial tolerance vs. supply voltage change vs. load change vs. aging / 1 year vs. aging (following years) -10 -3 -1 -3 -1 +10 +3 +1 +3 +1 ppm ppm ppm ppm ppm @vc=vs/2 v s 5% load 10% vs. operating temperature range (referenced to +25c) -30 +30 ppm -40 to +85c initial tolerance vs. supply voltage change vs. load change vs. aging / 1 year vs. aging (following years) -15 -3 -2 -3 -1 +15 +3 +2 +3 +1 ppm ppm ppm ppm ppm @vc=vs/2 v s 5% load 10% VX-501
vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com page 2 of 5 performance speci cations supply voltage (vs) parameter min typical max units condition supply voltage (standard) 3.135 3.3 3.465 vdc options current consumption 40 ma @ hcmos, sinewave current consumption 90 ma @ pecl, lvds supply voltage 4.75 5 5.25 vdc current consumption 30 ma @ hcmos, sinewave current consumption 80 ma @ pecl, lvds rf output signal hcmos options load 15 pf rise and fall time 5 ns @ 15 pf 10 to 90% duty cycle 40 60 % @ vs / 2 signal pecl load 50 rise and fall time 1 ns 20 to 80% duty cycle 45 55 % signal lvds load 100 rise and fall time 1 ns 10 to 90% duty cycle 40 60 % signal sinewave load 50 output power -3 0 3 dbm frequency tuning (efc) tuning range 75.0 90 200.0 linearity 10 % tuning slope positive control voltage range 0 0.5 1.65 2.5 3.3 4.5 vdc vdc with vs = 3.3v with vs = 5v frequency control input impedance 10 k additional parameters phase noise jitter -85 -115 -138 -153 -155 0.2 dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz ps rms 10 hz 100 hz 1 khz 10 khz 100 khz @ 12khz .. 20mhz @52mhz hcmos 3.3v phase noise jitter -80 -105 -135 -143 -145 0.6 dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz ps rms 10 hz 100 hz 1 khz 10 khz 100 khz @ 12khz .. 20mhz @ 155.52 mhz pecl 3.3v phase noise jitter -80 -112 -130 -150 -155 0.2 dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz ps rms 10 hz 100 hz 1 khz 10 khz 100 khz @ 12khz .. 20mhz @ 155.52 mhz lvds 3.3v phase noise jitter -55 -85 -115 -140 -150 0.1 dbc/hz dbc/hz dbc/hz dbc/hz dbc/hz ps rms 10 hz 100 hz 1 khz 10 khz 100 khz @ 12khz .. 20mhz @ 622.08 mhz pecl 3.3v
vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com page 3 of 5 additional parameters subharmonics -40 dbc for > 160 mhz only weight 2.0 g processing & packing handling & processing note absolute maximum ratings supply voltage (vs) 6.0 v operable temperature range -40 +85 c storage temperature range -55 +125 c performance speci cations cross reference list cross reference list typical phase noise and jitter phase noise VX-501 @ 52 mhz hcmos phase noise VX-501 @ 155.52 mhz lvpecl phase noise VX-501 @ 155.52 mhz lvds phase noise VX-501 @ 622.08 mhz lvpecl
vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com page 4 of 5 enclosure package codes type height h pin length l g223b 5.9 na package codes type height h g218b 5.9 pin connections 1 control voltage (vc) 2 ground 3 rf output 4 supply voltage input (vs) marking VX-501-xxxx frequency z ayy ww enable true table (optional) hcmos lvpecl / lvds pin 2 pin 4 pin 5 pin 4 pin 5 high data n.c. no data no data open data n.c. data compl. data low high tristate n.c. data compl. data pin connections 1 control voltage (vc) 2 n.c. / enable (option) 3 ground 4 rf output 5 rf output complementary (pecl / lvds) n.c. (cmos) 6 supply voltage input (vs)
vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com page 5 of 5 standard shipping method recommended re ow pro le pro le feature pb-free assembly/ sn-pb assembly pro le feature pb-free assembly/ sn-pb assembly average ramp-up rate (t l to t p ) 3c/second max. time 25c to peak temperature 8 minutes max. preheat -temperature min t smin -temperature min t smax -time (min to max) t s 150c 200c 60-180 seconds time maintained above -temperature (t l ) -time (t l ) 217c 60-150 seconds tsmax to tl -ramp-up rate 3c/second max time maintained above -temperature (t l ) -time (t l ) 217c 60-150 seconds time within 5c of actual peak temperature (t p ) 20-40 seconds peak temperature (t p ) max 260c ramp-down rate 6c/ second max note : all temperatures refer to topside of the package, measured on the package body surface. enclosure type tape width w (mm) quantity per meter quantity per reel dimension p g218b/g223b 24 83.3 850 12 *bei w 24 mm nur untere lochreihe ? by w d 24 mm o nl y l owe r h o l e lin e gurtoberseite tape upper side gurtunterseite tape buttom side abwickelrichtu n unwinding dire c lage im gurt position in tape pin 1 a x p b k
vectron international ? 267 lowell road, hudson, nh 03051 ? tel: 1-88-vectron-1 ? http://www.vectron.com page 6 of 5 ordering information VX-501 0 - e a j - 105 0 - 52m0000000 model code height 0: 5.9 mm (g223b) 1: 5.9 mm (g218b) supply voltage d: 5v e: 3.3v stability code e-305: 30ppm j-105: 15ppm frequency enable 0: no enable 1: enable rf output code a: hcmos c: pecl d: lvds e: sinewave temperature range e: -40c to +85c j: -20c to +70c notes: contact factory for improved stabilities or additional product options. not all options and codes are available at all 1. frequencies. unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency 2. control voltage, load, temperature (25c). phase noise degrades with increasing output frequency. 3. subject to technical modi cation. 4. contact factory for availability. 5. disclaimer vectron international reserves the right to make changes to the product(s) and or information contained herein without notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information. rev: 8/2008 for additional information, please contact usa: vectron international 267 lowell road hudson, nh 03051 tel: 1.888.328.7661 fax: 1.888.329.8328 europe: vectron international landstrasse, d-74924 neckarbischofsheim, germany tel: +49 (0) 7268-801-0 fax: +49 (0) 7268-801-281 asia: vectron international 1f-2f, no 8 workshop, no 308 fenju road waigaoqiao free trade zone pudong, shanghai, china 200131 tel: 86.21.5048.0777 fax: 86.21.5048.1881
|
